|
| Brand Name: | TJR |
| MOQ: | 1 |
| Item/Model | Unit | AR(s)-125R | AR(s)-170R |
|---|---|---|---|
| Table Diameter | mm | Ø 125 | Ø 170 |
| Diameter of Table Central Hole | mm | Ø 35H7 | Ø 67 |
| Inner Diameter of Mandrel Sleeve | mm | - | Ø 40H7 |
| Diameter of Center Through Hole | mm | Ø 25 | Ø 40 |
| Center Height (Vertical) | mm | 110 | 135 |
| Table Height (Horizontal) | mm | 152 | 152 |
| Table T-slot Width | mm | 12H7 | 12H7 |
| Guide Block Width | mm | 14h7 | 18h7 |
| Min. Increment | deg. | 0.001 | 0.001 |
| Indexing Precision | sec. | 40 | 20 |
| Repeatability | sec. | 6 | 6 |
| Clamping System (Pneumatic) | kg/cm² | 6 | 6 |
| Clamping Torque | kg-m | 13 | 31 |
| Servo Motor Model | FANUC | Taper shaft | Taper shaft |
| MITSUBISHI | Taper shaft | Taper shaft | Taper shaft |
| Speed Reduction Ratio | - | 1:60 | 1:90 |
| Max. Rotation Rate of Table (Calculate with Fanuc α Motor) | r.p.m | 83.3 *(33.3) | 44.4 *(33.3) |
| Allowable Inertia Load Capacity (Horizontal) | kg.cm.sec² | 2 | 5.4 |
| Allowable Workpiece Load | Vertical | 50 | 75 |
| with Tailstock | kg | 100 | 150 |
| Horizontal | kg | 100 | 150 |
| Allowable Load(with Rotary Table Clamping) | F | 1000 | 1450 |
| FxL | kgf.m | 45 | 110 |
| FxL | kgf.m | 13 | 31 |
| Strength of worm gears | kg.m | 9 *(3.7) | 18 *(14.6) |
| Net Weight (servo motor excluded) | kg | 34 | 50 |
